jak skryt jakykoliv vystup na terminal

s odkazem na:

"na deskriptoru 1 mate standardni vystup, na deskriptoru 2 mate chybovy
vystup.
Vy jste presmeroval pouze deskriptor 2 - musite presmerovat oba dva.

A to bud takto:

tar -C -xzf file.tar.gz 2> /dev/null 1> /dev/null

nebo presmerovanim vsech vystupnich deskriptoru:

tar -C -xzf file.tar.gz &> /dev/null

popr. spojenim jednoho vystupniho deskriptoru do jineho:

tar -C -xzf file.tar.gz 2> /dev/null 1>&2
tar -C -xzf file.tar.gz 1> /dev/null 2>&1

U tohoto prikladu si musite pozor, abyste pouzil '>&' az po pouziti
presmerovani vystupu do '/dev/null'.
Nasledujici priklad je chybny a nebude fungovat tak, jak byste ocekaval:

tar -C -xzf file.tar.gz 2>&1 1> /dev/null

Ve vsech vyse zminenych prikladech, se obvykle ta jednicka vynechava,
ale obecne tam byt ma."
- jak skryt jakykoliv vystup na terminal (Jyxo Usenet) (zobrazit ve WikiKomentářích Google)

CATIA 32bit na XP64

CATIA 32bit na XP64

s odkazem na:

"Installation of 32-bit V5 applications: Although V5 products are 32-bit applications, they will be able to allocate up to 4GB of Memory when running on this operating system."
- IBM - CATIA V5 - Software requirements (zobrazit ve WikiKomentářích Google)

Tabak - první tabáčky

• W.O. Larsen Simply Unique 50g
• Mac Baren Cube Premium Pipe Tobacco Gold 40g
• Mac Baren Cherry Choice 40g
• Holger Danske Mango and Vanilla 50g

Dymka Peterson Aran (B5) Fishtail

Length: 5.80 in./147.32 mm. 
Weight: 1.90 oz./53.86 g.
Bowl Height: 1.91 in./48.51 mm.
Chamber Depth: 1.52 in./38.61 mm. 
Chamber Diameter: 0.84 in./21.34 mm.
Outside Diameter: 1.81 in./45.97 mm. 
Stem Material: Vulcanite  
Shape: Bent Bulldog
Finish: Smooth 
Material: Briar
Country: Ireland 

http://youtu.be/ewfpGXQsbAk

17.7.2009 od Pepy

Zablokujte nechtěný restart Windows - po update

Ve Windows XP Professional proveďte následující postup:

1. V nabídce Start zvolte příkaz Spustit (nebo použijte klávesovou zkratku Win + R), do pole Otevřít napište gpedit.msc a stiskněte klávesu Enter. Tím spustíte editor Zásady skupiny
2. V levém podokně v části Místní počítač – zásady rozbalte položku Konfigurace počítače.
3. Rozbalte položku Šablony pro správu, přejděte do větve Součásti systému Windows a klepněte na položku Windows Update.
4. Poklepejte na položku Zakázat automatické restartování u přihlášených uživatelů po plánovaných instalacích automatických aktualizací.
5. V okně, které se otevře, na záložce Nastavení vyberte volbu Povoleno a klepněte na OK, nakonec zavřete editor Zásady skupiny.

Tento postup lze použít i ve Windows Vista Business, Enterprise nebo Ultimate. Pokud používáte Windows XP Home, Home Premium nebo Home Basic, nemůžete použít editor Zásady skupiny a musíte využít jiný postup:

1. Otevřete okno Spustit (Win + R), napište regedit (registry editor) a stiskněte klávesu Enter.
2. Najděte klíč HKEY_LOCAL_MACHINE\Software\Policies\Microsoft\Windows\WindowsUpdate\AU.
3. Poklepejte na položku NoAutoRebootWithLoggedOnUsers a změňte hodnotu DWORD na 1.

How to automatically log in to Windows XP Professional - Direct Bootup Without Typing Password

1. At a command prompt, type "controluserpasswords2" and press Enter to open the Windows 2000-style User Accounts application.
2. On the Users tab, clear the Users Must Enter A User Name And Password To Use This Computer check box and then click OK.
3. In the Automatically Log On dialog box that appears, type the user name and password for the account you want to be logged on each time you start your computer

http://www.kellys-korner-xp.com/win_xp_passwords.htm

http://wiki.ljackson.us/

How to Enable Automatic Logon in Windows

If you set a computer for auto logon, anyone who can physically obtain access to the computer can gain access to all of the computer contents, including any network or networks it is connected to. In addition, if you enable autologon, the password is stored in the registry in plaintext. The specific registry key that stores this value is remotely readable by the Authenticated Users group.

As a result, this setting is only appropriate for cases where the computer is physically secured, and steps have been taken to ensure that untrusted users cannot remotely access the registry.

1. Start/Run/Regedit, and then locate the following registry subkey:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon
2. Using your account name and password, double-click the DefaultUserName entry, type your user name, and then click
OK.
3. Double-click the DefaultPassword entry, type your password, and then click OK.

NOTE: The DefaultPassword value may not exist. If it does not:

a. Click Add Value on the Edit menu.
b. In the Value Name box, type DefaultPassword, and then click REG_SZ for the Data Type
c. Type your password in the String box, and then save your changes.

Also, if no DefaultPassword string is specified, Windows automatically changes the value of the AutoAdminLogon key
from 1 (true) to 0 (false), thus disabling the AutoAdminLogon feature.

4. Click Add Value on the Edit menu, enter AutoAdminLogon in the Value Name box, and then click REG_SZ for the Data
Type.
5. Type "1" (without the quotation marks) in the String box, and then save your changes.
6. Quit Regedit.
7. Click Start, click Shutdown, and then click OK to turn off your computer.
8. Restart your computer and Windows. You are now able to log on automatically.

NOTE: To bypass the AutoAdminLogon process, and to log on as a different user, hold down the SHIFT key after you log off or after Windows restarts.

Note that this procedure only applies to the first logon. To enforce this setting for subsequent logoffs, the administrator must set the following registry key:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\Winlogon

Value: ForceAutoLogon
Type: REG_SZ
Data: 1

Ophcrack - Windows password cracker

Ophcrack is a free Windows password cracker based on rainbow tables. It is a very efficient implementation of rainbow tables done by the inventors of the method. It comes with a Graphical User Interface and runs on multiple platforms.

http://ophcrack.sourceforge.net/

XP: Logon Automatically When Starting Windows

1. Click on the Start Menu
2. Click Run
3. In the open field type: control userpasswords2
4. Click OK
5. An User Accounts Dialog Box will open.
6. Select the Users Tab
7. Clear the Users must enter a user name and password to use this computercheckbox
8. Select the Advanced Tab
9. If it is not already, clear the Require users to press Ctrl-Alt-Del before logging oncheckbox
10. Press Apply
11. A dialog box will open asking you for user name and password
12. Input the information into these fields
13. Click OK
14. Click on Start Menu again
15. Open your Control Panel
16. Open User Accounts
17. Click Change the way users log on or off
18. If it is not already, clear checkbox for Use the Welcome Screen
19. If it is not already, clear checkbox for Use Fast User Switching
20. Click the Apply Options button
21. Reboot to see your results

How to change the Windows Logon screen saver in Windows XP

http://support.microsoft.com/kb/314493

Change the Logon Screen Saver

To change the logon screen saver, follow these steps.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

1. Click Start, and then click Run.
2. In the Open box, type regedt32, and then click OK.
3. In the Registry Editor window, locate the following registry key:
   HKEY_USERS\.DEFAULT\Control Panel\Desktop
4. In the right pane, double-click SCRNSAVE.EXE.
5. In the Edit String dialog box, type the name of the screen saver that you want in the Value data box, and then click OK. For example, if you want to use the Mystify screen saver as your logon screen saver, type ssmyst.scr.
   
   IMPORTANT: Make sure that you correctly specify the path to the screen saver. If the screen saver is located in %SystemRoot%\System32, the explicit path is not required.
6. Click Exit on the File menu to quit Registry Editor.

The logon screen saver changes to the screen saver that you specified.

Back to the top

Change the Logon Screen Saver Timeout Time

You can also change the time that elapses before the logon screen saver starts. The default setting is 600 seconds (10 minutes).

To change the length of time before the logon screen saver starts, follow these steps.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows

1. Click Start, and then click Run.
2. In the Open box, type regedt32, and then click OK.
3. In the Registry Editor window, locate the following registry key:
   HKEY_USERS\.DEFAULT\Control Panel\Desktop
4. In the right pane, double-click ScreenSaveTimeOut.
5. In the Edit String dialog box that appears, type the number of seconds after which you want the screen saver to start in the Value data box, and then click OK. For example, if you want the screen saver to start after 5 minutes, type 300.
6. Click Exit on the File menu to quit Registry Editor.

The length of time that elapses before the logon screen saver starts is changed to the value that you specified.

Back to the top

Turn Off the Logon Screen Saver

To turn off the logon screen saver, follow these steps.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:

322756 (http://support.microsoft.com/kb/322756/ )

How to back up and restore the registry in Windows

1. Click Start, and then click Run.
2. In the Open box, type regedt32, and then click OK.
3. In the Registry Editor window, locate the following registry key:
   HKEY_USERS\.DEFAULT\Control Panel\Desktop
4. In the right pane, double-click ScreenSaveActive.
5. In the Edit String dialog box, type 0 in the Value data box, and then click OK.
6. Click Exit on the File menu to quit Registry Editor.

The logon screen saver is turned off.

Create your own user-defined services Windows NT/2000/XP/2003

http://www.tacktech.com/display.cfm?ttid=197



The Windows NT/2000 Resource Kit provides two utilities that allow you to create a Windows user-defined service for Windows applications and some 16-bit applications (but not for batch files). 


Whats needed for Windows NT/2000:
Instrsrv.exe installs and removes system services from Windows NT/2000
Srvany.exe allows any Windows application to run as a service.
You can download both files here srvany.zip 


This zip includes three files. The two you need srvany.exe and instsrv.exe to install the services and also srvany.wri which documents everything you can do with the program.
Note: Make sure the Services Manager is closed while running the DOS commands. 


You will need to put these files in a directory called reskit At a MS-DOS command prompt(Start | Run | "cmd.exe"), type the following command:
\reskit\INSTSRV.EXE "Service Name" \reskit\SRVANY.EXE
This creates the service in the Services manager and the registry keys to setup what program to run.


Next open regedit.exe Start | run | regedit.exe
WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.


Next navigate to this registry key.
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\service name


From the Edit menu, click Add Key and name it Parameters
Next from the Edit menu, click Add Value and type this information.
Value Name: Application
Data Type : REG_SZ
String : \


Now you can start your service from the Service Manager


With this same program you can remove the service also. Just run this command from command prompt.
\reskit\INSTSRV.EXE "Service Name" REMOVE

Spusteni GPEDIT.MSC - Remote

gpedit.msc /gpcomputer:"catia66"

Disable the USB Autorun (CD and DVD drives)

1. Click the Start button, then Run and enter "gpedit.msc" without the quotes
2. Go to Computer Configuration -> Administrative Templates -> System
3. Scroll down to "Turn off Autoplay" and double click on it
4. Click on the "Enabled" radio button, then for "Turn off Autoplay on" select "All drives"

It also disables the autoplay for CD and DVD drives.

How To Disable Autorun (CD and DVD drives)

Registry :
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Cdrom\

"Autorun" the value is set to 1 by default, change it to zero

Reboot Windows

Zkratky - Acronyms

LOL (Laughing Out Loud - směji se, až se za břicho popadám)
ROFL (Rolling On Floor Laughing - smíchy se válím po zemi)
AFAIK (As Far As I Know - pokud se nepletu, pokud je mi známo)
IMHO (In My Humble Opinion - dle mého skromného názoru)
IMAO (In My Arogant Opinion - dle mého arogantního názoru)
BTW (By The Way - mimochodem)
ASAP (As Soon As Possible - co nejdříve to půjde, jakmile to bude možné)
4U (For You - pro tebe)
BFU (Bloody Fucking User - eufemicky běžný franta uživatel)
BRB (Be Right Back - hned jsem tu, buď brzy zpět)
CU/CUS (See You/See You Soon - na viděnou/brzy na viděnou)
GN (Good Night - dobrou noc)
OMG (Oh My God - pane Bože, proboha)
OT (Off Topic - nepatří k věci, příspěvek mimo mísu)
PLS (Please - prosím)
THX (Thanks - děkuji)
WTF (What The Fuck - co to sakra je?)

akronym	anglický význam	český překlad
2U	To You	tobě
4E	For You	pro tebe
4YEO	For Your Eyes Only	tajné, soukromé, jen pro tvé oči
2L8	Too Late	pozdě, příliš pozdě
AFAIK	As Far As I Know	pokud vím, pokud se nepletu
AKA	Also Knows As	také známý jako
AFK	Away From Keyboard	nejsem tu
ASAP	As Soon As Possible	jakmile to bude možné, co nejdříve
AYOR	At Your Own Risk	na vlastní riziko
BB	Bye Bye	čau čau
BBL/S	Be Back Later/Soon	vrátím se později/brzy
BFU	Bloody Fucking User	běžný franta uživatel (eufemicky)
BRB	Be Right Back	budu hned zpátky/buď hned zpět
BTW	By The Way	mimochodem
CU, CUS	See You	ahoj (uvidíme se)
CU2	See You Too	taky ahoj
CUS	See You Soon	brzy na viděnou
DND	Do Not Disturb	nerušit, nerušte
DIY	Do It Yourself	udělej si dám
FAQ	Frequently Asked Questions	často kladené dotazy
FE	For Example	například
FCI	Free Cool In	frikulín (osoba co je free-cool-in - zpravidla hanlivé)
FYI	For Your Information	pro tvou informaci
GR8	Great	paráda, super, dobrý
GL	Good Luck	hodně zdaru
GN	Good Night	dobrou noc
GNSD	Good Night, Sweet Dreams	dobrou noc, sladké sny
GOK	God Only Knows	to ví jen Bůh
GIYF	Google Is Your Friend	Google je tvůj kamarád
GTB / GS	Go Too Bed / Go sleep	jdu (jdi) do postele, jdu (jdi) spát
HF	Have Fun	bav se, příjemnou zábavu přeji
HTH	Hope This Helps	doufám, že to pomůže
IANAL	I´m Not A Lawyer	nejsem právník
IC	I See	aha, chápu, rozumím
IDK	I Don´t Know	nevím, neznám
IDGI	I Don´t Get It	nechápu to, nerozumím
IMAO	In My Arogant Opinion	dle mého arogantního názoru
IMHO	In My Humble Opinion	dle mého skromného názoru
IOW	In Other Words	jinými slovy
JFGI	Just Fucking Google It	vygoogluj si to (vyhledej to ve vyhledávači Google)
K, OKI	OK	ok, ano
KISS	Keep It Short and Simple	udělej to stručně (krátce) a jednoduše
LMAO	Laughing My Ass Off	smíchy se asi znečistím
LOL	Laughing Out Loud	směji se, až se za břicho popadám
L4	Looking For	hledám
L8R	Later	později
M2	Mee Too	já také
NC	No Comment	bez komentáře
NOOB	Noobie	nováček
NP	No Problem	žádný problém, bez problému
NRN	No Reply Necessary	odpověď není nutná
NT	Nice Try	dobrý pokus
NVM	Never mind	nevadí, neřeš
OMG	Oh My God	panebože, proboha
OT	Off Topic	není k věci, příspěvek mimo mísu
PEBKAC	Problem Exists Between Keyboard and Chair	problém se nachází mezi židlí a klávesnicí
PLS	Please	prosím
Q/A	Questions and Answers	otázky a odpovědi
ROFL	Rolling On Floor Laughing	válím se smíchy po zemi
RTFM	Read The Fucking Manual	přečti si sakra ten návod
SNAFU	Situation Normal, All Is Fucked Up	situace je normální, všechno je v pytli
SRY	Sorry	promiň, omlouvám se
TANJ	There Ain´t No Justice	není spravedlnosti
TGBADQ	Try Google, Before Asking Dumb Questions	zkus Google, než se začneš hloupě ptát
TGIF	Thanks God, It´s Friday	Díky Bohu, že je pátek
THX	Thanks	díky, děkuji
U2	You Too	ty taky, tobě taky
W8	Wait	počkej
WTF	What The Fuck	co to sakra...
WYSIWYG	What You See Is What You Get	co vidíš, to dostaneš
YABA	Yet Another Bloody Acronym	zase další pitomá zkratka

umount: device is busy

umount: /netapp: device is busy

You can use the fuser command to find out which process was keeping the device busy:

# fuser -m /dev/sdc1
/dev/sdc1: 538
# ps auxw|grep 538
donncha 538 0.4 2.7 219212 56792 ? SLl Feb11 11:25 rhythmbox

You can use the -k option to kill all processes using the specified file or filesystem.
In the following example, the UNIX PIDs 1313 and 1223 will be killed:

# fuser -k /dev/dsk/c0t2d0s7
/dev/dsk/c0t2d0s7: 1313co 1223c